1. A0: The partial site plan indicates a side door in the enclosure. However this does not appear on SW1. Please clarify.
2. A0: Please indicate how rainwater will be collected and were will it be discharged.
3. Please specify the minimum compressive strength for the pour in place concrete and the block wall grout.
4. Please specify the minimum grade of the concrete reinforcement.
5. 91/SW1: Please specify the size of the welds in this detail.
6. Welding is a special inspection item. Please complete two copies of the Special Inspection and Testing Agreement and two copies of the Statement of Special Inspection. You may download a copy of these forms from our website at http://www.sccoplanning.com/ (go to Forms under the Building & Safety tab). Note: Selected inspection agency must be pre-approved by the Building Official. Refer to the approved agency list.
This review is based on the 2016 California Codes, as adopted by Santa Cruz County. If you have any questions regarding these comments, please call Jim Heaney between the hours of 8:00 am - 4:00 pm at (831) 454-3166 or email jim.heaney@santacruzcounty.us .
TOP